Cleaning method

It is used when the water quality is better and the filtration level is higher. The sewage suction pipe is driven by the driving device to make a spiral reciprocating movement, and the impurities on the surface of the filter screen are sucked out by the suction port on the main sewage suction pipe, and the impurities are discharged through the sewage drain.

Surface interception filtration is mainly suitable for particulate impurities.

Scanning suction decontamination, internal backwashing.

Install online and occupy less space.

Regular repair and maintenance.

working principle

When water flows through the filter, impurities in the water will gradually accumulate on the surface of the filter screen in the filter. As the filtering process proceeds, the pressure difference between the inlet and outlet of the filter of the water treatment equipment manufacturer will gradually increase, and when the pressure difference reaches the set point When the value is set, the filter will automatically perform anti-cleaning to clean the impurities deposited in the filter and discharge it.

way to control

The filter is equipped with a differential pressure switch and an integrated controller. When the pressure difference reaches the preset value, it will transmit a signal to the controller, and the controller will start the driving device for cyclic cleaning. At the same time, it can perform timing control backwashing, or according to the actual situation Manual cleaning.

Filter flow: 50-7000m3/h

Filtration accuracy: 100-3500um

Structure: single tube and multi-column

Cleaning method: Scanner suction brush type negative pressure water flush type

Filter form: wedge, drill, woven

Working mode: continuous filtration, backwashing and continuous flow

Scope of application: cooling water towers, steel plants, electricity, paper mills, food processing plants, chemicals, plastics, mining, agricultural irrigation, etc.

Dimensions and technical parameters