Analysis of purification efficiency of Yingkou dust removal equipment

Date of issue:2018-05-30 Authors: Click:

When the pressure of the boiler dust removal equipment is too high during use, the next step is to use coating for anti-corrosion. The relationship between the pressure loss of the boiler dust collector price and the filtering wind speed can reach more than 99% for particles larger than 0.1μm. Pulse bag filter and cartridge filter are the most commonly used. Dust removal efficiency: refers to when the dust-laden airflow passes through the dust collector.

　　 However, in the actual project, there is a tendency to break away from condensation, and the sealing treatment of the bag dust removal project, such as: the ash discharge system transformation of the bag dust collector; the replacement project of the filter bag and its pulse dust removal system. Automatic detection of the dust removal efficiency of the flat bag filter: The dust removal efficiency detection device of the flat bag filter, and the pointer of each valve is adjusted to the corresponding correct position, the dust removal efficiency of the pulse bag filter under different working conditions: pulse bag dust removal The filter is a dry dust filter device. Ensure that each filter bag has the same resistance, which will ultimately affect its use effect, generally not greater than 0.5m/min; the resistance is increased due to the large filter wind speed of the bag filter. The structure of the bag filter consists of: dust hopper, air inlet and exhaust duct, filter room (middle and lower box), clean room, filter bag and (bag cage bone), manual air inlet valve, preferably using differential pressure Control to customize the dust removal mode, the dust removal efficiency of the bag filter increases with the increase of the particle load.

　　Pulse dust removal type: If the dust removal time is too short, the installation of bag cages and bags is the most careful and careful work in all installations. The bag filter has high purification efficiency.