Introduction to the relevant knowledge of softened water equipment

Application and maintenance of softened water equipment: Yingkou softened water equipment

       The quality of the raw water should meet the requirements of general sodium ion exchange water treatment equipment; the equipment should be installed indoors, in order to prevent resin frost damage, parts corrosion, electrical short-circuit failure, the ambient temperature should be above zero, no steam, and a relatively dry and clean place ; After the equipment is in place, re-tighten all the fixing bolts, and the switchboard shell should be grounded; the upper and lower bolts of the fixed block of the rotary valve upper lever cannot be loosened, and the exchange column cannot be hit; the time relay, do not adjust during work, repair and scrub the equipment When operating, the power must be cut off, and the motor, switchboard, and limit switch must be prevented from entering water; during operation, water and electricity are supplied at the same time. When the operation is out of operation, the water and electricity will be shut down; always keep the equipment clean, and do not run out of oil in the refueling part. Touch the pulley to avoid accidents.

     Nowadays, there is a kind of fully automatic water softening equipment on the market. The equipment is operated accurately and reliably by an advanced program control device, instead of manual operation, and fully realizes the automatic conversion of each link of water treatment. High efficiency, low energy consumption, economical operating costs. Due to the reasonable overall design of the softener, the resin's exchange capacity can be fully utilized. The equipment uses jet-type salt absorption instead of salt pumps, reducing energy consumption.