YL-L series water filter

working principle

YL-L series electric brush filter is a kind of automatic self-cleaning filter. The boiler softening water equipment installs a set of brushes in the filter screen. The brushes are driven by the motor to rotate, and an electromagnetic drain is installed on the filter end cover. valve. When cleaning, the signal from the differential pressure controller is transmitted to the control panel, and the control panel opens the drain valve and starts the motor at the same time, driving the brush to rotate to brush off the dirt and impurities. Under the action of hydraulic power, the filter is discharged through the drain valve, and the cleaning does not need to be interrupted. .

Filtration and cleaning

The water flows in from the inlet of the filter, and flows out from the outlet after passing through the filter. When the impurity particles in the water flow continue to accumulate on the inner surface of the filter, the pressure difference between the upstream and downstream of the filter increases. ) When the pressure difference reaches a predetermined value (0.05MPa), the pressure difference switch transmits a signal to the control panel, and the control panel starts the motor to drive the brush to rotate and brush off the dirt and impurities on the filter screen. Open the drain valve at the same time. The dirt is drained from the drain valve.

Control System

Adopt PLC automatic control. The backwash can be controlled according to the pressure difference or timing, and it can be manually cleaned and designed as continuous cleaning. There will be warning signals or corresponding actions when failures occur.

Manufacturing material

Standard filter grade